Door Lock Control Module Scan Tool Information Driver Door Module
| Table 1: | Driver Door Module Scan Tool Data Parameters |
| Table 2: | Driver Door Module Scan Tool Output Controls |
Parameter | System State | Expected Value | Description |
|---|---|---|---|
Operating Conditions: Ignition ON | |||
Battery Voltage Signal | -- | Varies | This displays Volts. This is the current battery voltage signal. |
Deadbolt Actuator Command | -- | Idle | The scan tool displays Idle, Lock, Unlock or Invalid. This is the state of the deadbolt actuator. |
Door Ajar Switch | -- | Door Closed | The scan tool displays Door Ajar or Door Closed. This is the state of the door ajar switch. |
Door Open Switch | -- | Closed | The scan tool displays Open or Closed. This is the state of the door open switch. |
Door Cylinder Switch | -- | Idle | The scan tool displays Idle, Lock, Unlock or Invalid. This is the state of the door cylinder switch. |
Door Switch Backlight Command | -- | Varies | This displays %. This is the commanded door switch backlighting dimming percentage. |
Driver Door Handle | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the driver door handle. |
Driver Mirror Heater | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the driver mirror heater. |
Driver Mirror Horizontal Position | -- | Varies | This displays Volts. This is the current driver mirror horizontal position measured in volts. |
Driver Mirror Motors Command | -- | Idle | The scan tool displays Idle, Fold Out, Fold In, Left, Right, Down or Up. This is the commanded state of the driver mirror motors. |
Driver Mirror Vertical Position | -- | Varies | This displays Volts. This is the current driver mirror vertical position measured in volts. |
Exterior Courtesy Lamp Command | -- | Varies | This displays %. This is the commanded exterior courtesy lamps dimming percentage. |
Exterior Courtesy Lamp Status | -- | Off | The scan tool displays On or Off. This is the state of the exterior courtesy lamps. |
LF Latch Solenoid Command | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the driver front latch solenoid. |
Lock Indicator Command | -- | Varies | This displays %. |
Lock Switch Indicator Command | -- | Off | The scan tool displays On or Off. This is the state of the lock switch indicator. |
VIN Learned | -- | Yes | The scan tool displays Yes or No. Yes is displayed if the vehicle identification number (VIN) is learned. |
VIN Message Received | -- | Yes | The scan tool displays Yes or No. Yes is displayed if the vehicle identification number (VIN) message is received. |
Window Motor Command | -- | Idle | The scan tool displays Idle, Up, Down or Active. This is the commanded state of the window motor. |
Window Normalization | -- | Varies | The scan tool displays Yes or No. |
Output Control | Description |
|---|---|
Disable DTC(s) | This output control is used to disable DTCs in the module. |
Door Deadbolt Lock/Unlock | This output control is used to command the door deadbolt. |
Door Switch Backlight | This output control is used to command the door switch backlighting. |
Driver Mirror Horizontal Motor | This output control is used to command the driver mirror horizontal motor. |
Driver Mirror Vertical Motor | This output control is used to command the driver mirror vertical motor. |
Driver Window Motor | This output control is used to command the driver window motor. |
Exterior Courtesy Lamp | This output control is used to command the exterior courtesy lamps. |
LF Latch Solenoid | This output control is used to command the driver front latch solenoid. |
Lock Switch Indicator | This output control is used to command the lock switch indicator ON or OFF. |
Mirror Fold | This output control is used to command the mirror fold. |
Mirror Heater | This output control is used to command the mirror heater ON or OFF. |
Door Lock Control Module Scan Tool Information Driver Door Switch
Parameter | System State | Expected Value | Description |
|---|---|---|---|
Operating Conditions: Ignition ON | |||
Battery Voltage Signal | -- | Varies | This displays Volts. This is the current battery voltage signal. |
Door Lock Switch | -- | Idle | The scan tool displays Idle, Lock, Unlock or Invalid. This is the state of the door lock switch. |
Driver LF Window Switch | -- | Idle | The scan tool displays Idle, Xpress Up/Down, Down, Xpress Down, Up or Express Up. This is the state of the driver left/front window switch. |
Driver LR Window Switch | -- | Idle | The scan tool displays Idle, Xpress Up/Down, Down, Xpress Down, Up or Express Up. This is the state of the driver left/rear window switch. |
Driver RF Window Switch | -- | Idle | The scan tool displays Idle, Xpress Up/Down, Down, Xpress Down, Up or Express Up. This is the state of the driver right/front window switch. |
Driver RR Window Switch | -- | Idle | The scan tool displays Idle, Xpress Up/Down, Down, Xpress Down, Up or Express Up. This is the state of the driver right/rear window switch. |
Mirror Direction Switch | -- | Idle | The scan tool displays Idle, Right & Down, Left & Down, Right, Right & Up, Down, Left & Up, Up and Left. This is the state of the mirror direction switch. |
Mirror Fold Switch | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the mirror fold switch. |
Mirror Select Switch | -- | Off | The scan tool displays Off, Invalid, Driver or Passenger. This is the state of the mirror select switch. |
Trunk Release Switch | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the trunk release switch. |
Window Lockout Switch | -- | Off | The scan tool displays On or Off. This is the state of the window lockout switch. |
Window Lockout Switch Indicator | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the window lockout switch indicator. |
Door Lock Control Module Scan Tool Information Passenger Door Module
| Table 1: | Passenger Door Module Scan Tool Data Parameters |
| Table 2: | Passenger Door Module Scan Tool Output Controls |
Parameter | System State | Expected Value | Description |
|---|---|---|---|
Operating Conditions: Ignition ON | |||
Battery Voltage Signal | -- | Varies | This displays Volts. This is the current battery voltage signal. |
Deadbolt Actuator Command | -- | Idle | The scan tool displays Idle, Lock, Unlock or Invalid. This is the state of the deadbolt actuator. |
Door Ajar Switch | -- | Door Closed | The scan tool displays Door Ajar or Door Closed. This is the state of the door ajar switch. |
Door Open Switch | -- | Closed | The scan tool displays Open or Closed. This is the state of the door open switch. |
Door Lock Switch | -- | Idle | The scan tool displays Idle, Lock, Unlock or Invalid. This is the state of the door cylinder switch. |
Door Switch Backlight Command | -- | Varies | This displays %. This is the commanded door switch backlighting dimming percentage. |
Exterior Courtesy Lamp Command | -- | Varies | This displays %. This is the commanded exterior courtesy lamps dimming percentage. |
Exterior Courtesy Lamp Status | -- | Off | The scan tool displays On or Off. This is the state of the exterior courtesy lamps. |
Lock Indicator Command | -- | Varies | This displays %. |
Lock Switch Indicator Command | -- | Off | The scan tool displays On or Off. This is the state of the lock switch indicator. |
Passenger Door Handle | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the passenger door handle. |
Psgr. Mirror Heater | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the passenger mirror heater. |
Psgr. Mirror Horizontal Position | -- | Varies | This displays Volts. This is the current passenger mirror horizontal position measured in volts. |
Psgr. Mirror Motors Command | -- | Idle | The scan tool displays Idle, Fold Out, Fold In, Left, Right, Down or Up. This is the commanded state of the passenger mirror motors. |
Psgr. Mirror Vertical Position | -- | Varies | This displays Volts. This is the current passenger mirror vertical position measured in volts. |
RF Latch Solenoid Command | -- | Inactive | The scan tool displays Active or Inactive. This is the state of the passenger front latch solenoid. |
VIN Learned | -- | Yes | The scan tool displays Yes or No. Yes is displayed if the vehicle identification number (VIN) is learned. |
VIN Message Received | -- | Yes | The scan tool displays Yes or No. Yes is displayed if the vehicle identification number (VIN) message is received. |
Window Motor Command | -- | Idle | The scan tool displays Idle, Up, Down or Active. This is the commanded state of the window motor. |
Window Normalization | -- | Varies | The scan tool displays Yes or No. |
Window Switch | -- | Idle | The scan tool displays Idle, Invalid, Down, Express Down, Up or Express Up. This is the state of window switch. |
Output Control | Description |
|---|---|
Disable DTC(s) | This output control is used to disable DTCs in the module. |
Door Deadbolt Lock/Unlock | This output control is used to command the door deadbolt. |
Door Switch Backlight | This output control is used to command the door switch backlighting. |
Exterior Courtesy Lamp | This output control is used to command the exterior courtesy lamps. |
Front Psgr. Window Motor | This output control is used to command the passenger front window motor. |
Lock Switch Indicator | This output control is used to command the lock switch indicator ON or OFF. |
Mirror Fold | This output control is used to command the mirror fold. |
Mirror Heater | This output control is used to command the mirror heater ON or OFF. |
Psgr. Mirror Horizontal Motor | This output control is used to command the passenger mirror horizontal motor. |
Psgr. Mirror Vertical Motor | This output control is used to command the passenger mirror vertical motor. |
RF Latch Solenoid | This output control is used to command the passenger front latch solenoid. |
