GM Service Manual Online
For 1990-2009 cars only

Engine Coolant Fan Replacement LH2 Heavy Duty Cooling

Removal Procedure

  1. Remove the upper mounting bolts that secure the auxiliary cooling fan assembly to the condenser.
  2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.

  3. Object Number: 1335111  Size: SH
  4. Remove the front air deflector retainers.
  5. Remove the front air deflector.

  6. Object Number: 1372873  Size: SH
  7. Disconnect the electrical connectors from the auxiliary cooling fan assembly.
  8. Remove the lower mounting bolts that secure the auxiliary cooling fan assembly to the condenser.
  9. Remove the auxiliary cooling fan assembly.

Installation Procedure


    Object Number: 1372873  Size: SH
  1. Install the auxiliary cooling fan assembly.
  2. Caution: Refer to Fastener Caution in the Preface section.

  3. Install the mounting bolts that secure the auxiliary cooling fan assembly to the condenser and tighten to 5.4 N·m (48 lb in).
  4. Connect the electrical connectors to the auxiliary cooling fan assembly.

  5. Object Number: 1335111  Size: SH
  6. Install the front air deflector.
  7. Install the front air deflector retainers.
  8. Lower the vehicle.
  9. Install the upper mounting bolts that secure the auxiliary cooling fan assembly to the condenser and tighten to 5.4 N·m (48 lb in).

Engine Coolant Fan Replacement LC3, LY7

Removal Procedure

    Warning: An electric fan under the hood can start up even when the engine is not running and can injure you. Keep hands, clothing and tools away from any underhood electric fan.

    Warning: To help avoid personal injury or damage to the vehicle, a bent, cracked, or damaged fan blade or housing should always be replaced.

  1. Remove the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement.

  2. Object Number: 1335063  Size: SH
  3. Disengage the surge tank inlet hose from the retaining features on the cooling fan shroud and reposition aside.
  4. Remove the upper retaining bolts that secure the cooling fan shroud to the radiator.
  5. Remove the LH lower retaining bolt that secures the cooling fan shroud to the radiator.
  6. Disconnect the cooling fan electrical connectors.

  7. Object Number: 1335111  Size: SH
  8. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
  9. Remove the front air deflector retainers.
  10. Remove the front air deflector.

  11. Object Number: 1335060  Size: SH
  12. Remove the RH lower retaining bolt that secures the cooling fan shroud to the radiator.

  13. Object Number: 1335068  Size: SH
  14. Disconnect and reposition the engine wiring harness from the engine frame and reposition.
  15. Remove the retaining bolts that secure the power steering line to the cooling fan shroud.
  16. Remove the retaining bolts that secure the transmission oil cooler lines to the cooling fan shroud.
  17. Lower the vehicle.
  18. Remove the cooling fan assembly.

Installation Procedure

  1. Install the cooling fan assembly.

  2. Object Number: 1335068  Size: SH
  3. Raise the vehicle.
  4. Caution: Refer to Fastener Caution in the Preface section.

  5. Install the retaining bolts that secure the transmission oil cooler lines to the cooling fan shroud and tighten to 5.4 N·m (48 lb in).
  6. Install the retaining bolts that secure the power steering lines to the cooling fan shroud and tighten to 5.4 N·m (48 lb in).
  7. Connect the engine wiring harness to the engine frame.

  8. Object Number: 1335060  Size: SH
  9. Install the RH lower retaining bolt that secures the cooling fan shroud to the radiator and tighten to 5.4 N·m (48 lb in).

  10. Object Number: 1335111  Size: SH
  11. Install the front air deflector.
  12. Install the front air deflector retainers.
  13. Lower the vehicle.
  14. Connect the cooling fan electrical connectors.
  15. Install the upper retaining bolts that secure the cooling fan shroud to the radiator and tighten to 5.4 N·m (48 lb in).

  16. Object Number: 1335063  Size: SH
  17. Install the left side lower retaining bolt that secures the cooling fan shroud to the radiator and tighten to 5.4 N·m (48 lb in).
  18. Engage the surge tank inlet hose to the retaining features on the cooling fan shroud.
  19. Install the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement.

Engine Coolant Fan Replacement LH2 without V92, LLT


Object Number: 2099142  Size: MF

Callout

Component Name

Preliminary Procedures

Remove the cooling fan shroud. Refer to Engine Coolant Fan Shroud Replacement

1

Cooling Fan Retainer

Caution: Refer to Fastener Caution in the Preface section.

Tighten
7 N·m (62 lb in)

2

Cooling Fan