GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2007 🢒 STS 🢒 Engine 🢒 Engine Electrical 🢒 Stabilizer Shaft Link Replacement

Removal Procedure
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .

    2. Object Number: 874639 Size: SH

    Important: Hold the shaft link studs with the hex tool to prevent damage to the link seal.

  2. Remove the stabilizer shaft link upper retaining nut.
  3. Remove the stabilizer shaft link lower retaining nut.
  4. Remove the stabilizer shaft link from the vehicle.

Installation Procedure

    Object Number: 874639 Size: SH
  1. Install the stabilizer shaft link to the vehicle.

    2. Important: Do not tighten the nuts at this time.

    Important: Hold the shaft link studs with the hex tool to prevent damage to the link seal.

  2. Install the stabilizer shaft link lower retaining nut.

    3. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the stabilizer shaft link upper retaining nut.

    4. Tighten
    Tighten the nuts to 115 N·m (95 lb ft).

  4. Lower the vehicle.