GM Service Manual Online
For 1990-2009 cars only

Brake System Indicators

Brake

The instrument panel cluster (IPC) illuminates the BRAKE indicator and sends a serial data message in order to activate an audible warning when the following occurs:

    • The IPC detects that the park brake is applied--signal circuit is low.
    • The IPC detects a low brake fluid condition--signal circuit is low.
    • The electronic brake control module (EBCM) detects a malfunction with the antilock brake system (ABS). The IPC receives a serial data message from the EBCM requesting illumination.
    • The IPC detects a loss of communications with the EBCM and the discrete back-up ABS indicator signal is open.
    • The IPC performs the displays test at the start of each ignition cycle. The indicator illuminates for approximately 5 seconds.

Check Brake Fluid

The IPC illuminates the CHECK BRAKE FLUID indicator in the driver information center (DIC) and sends a serial data message in order to activate an audible warning when the IPC detects that the brake fluid level is below the normal operating range.