GM Service Manual Online
For 1990-2009 cars only

Front Side Door Lock and Inside Handle Rod Replacement w/o UA2


Object Number: 1477690  Size: LF

Callout

Component Name

Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Front Side Door Lock Assembly Replacement

Preliminary Procedures

  1. Remove the front side door trim panel. Refer to Front Side Door Trim Panel Replacement .
  2. Remove the front side door water deflector. Refer to Front Side Door Water Deflector and Check Link Replacement .

1

Screw, Front Side Door Lock (Qty: 2)

Tighten
9 N·m (80 lb in)

2

Lock Assembly, Front Side Door

Tip

  1. Raise the window to the full up position.
  2. The following items will need to be disconnected for removal and reconnected for installation:
  3. • Lock cylinder rod
    • Outside handle lock rod by opening the clip
    • Lock assembly electrical connector
  4. Remove the lock assembly from the door with the inside handle cable assembly attached.

Front Side Door Inside Handle Cable Assembly Replacement

Preliminary Procedures

  1. Remove the front side door trim panel. Refer to Front Side Door Trim Panel Replacement .
  2. Remove the front side door water deflector. Refer to Front Side Door Water Deflector and Check Link Replacement .

1

Screw, Front Side Door Lock (Qty: 2)

Tighten
9 N·m (80 lb in)

2

Lock Assembly, Front Side Door

Tip

  1. Raise the window to the full up position.
  2. The following items will need to be disconnected for removal and reconnected for installation:
  3. • Lock cylinder rod
    • Outside handle lock rod by opening the clip
    • Lock assembly electrical connector
  4. Remove the lock assembly from the door with the inside handle cable assembly attached.

3

Cable Assembly, Front Side Door Inside Handle