Schematic Reference: Audible Warnings Schematics

Connector End View Reference: Inline Harness Connector End Views or Computer/Integrating Systems Connector End Views

Did you perform the Diagnostic System Check - Vehicle?

Go to Step 2

Go to Diagnostic System Check - Vehicle in Vehicle DTC Information

1. Open the driver door.
2. Turn The parklamp switch to ON.
3. Place the key fob inside the vehicle.

Does the chime sound?

Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems

Go to Step 3

Do the courtesy lights turn on when you open the driver door?

Go to Step 4

Go to Courtesy Lamps Inoperative in Lighting Systems

Inspect for poor connections at the harness connector of the audio amplifier. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems.

Did you find and correct the condition?

Go to Step 6

Go to Step 5

Replace the audio amplifier. Refer to Control Module References in Computer/Integrating Systems for replacement,setup and programming.

Did you complete the replacement?

Go to Step 6

--

Operate the system in order to verify the repair.

Did you correct the condition?

System OK

Go to Step 2