GM Service Manual Online
For 1990-2009 cars only

Each of the following service procedures may require programming or setup procedures to be performed on the HVAC control module or HVAC actuators.

HVAC Control Module Replacement

If the HVAC control module is replaced an SPS procedure is necessary to update software.

Reprogram the HVAC Control Module. Refer to Service Programming System (SPS) .

HVAC Control Module Reprogramming

Reprogram the HVAC Control Module. Refer to Service Programming System (SPS) .

Actuator Replacement

If an actuator is replaced, a Re-Calibration of the actuator is not necessary. The HVAC module knows the exact location of the door when the HVAC system is turned on.