Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedures

1. Remove the engine sight shield. Refer to Intake Manifold Sight Shield Replacement .
2. Remove the front section of the supercharger inlet duct assembly. Refer to Supercharger Inlet Duct Assembly Replacement .
3. Remove the supercharger drive belt. Refer to Supercharger Belt Replacement .
4. Remove the air conditioning, power steering, and water pump drive belt. Refer to Water Pump and Air Conditioning Compressor and Power Steering Pump Belt Replacement .

1

Drive Belt Tensioner Assembly Bolt

Tighten
50 N·m (37 lb ft)

2

Drive Belt Tensioner Assembly

Tip