GM Service Manual Online
For 1990-2009 cars only

Object Number: 1828585  Size: MF

Callout

Component Name

1

Shift Control Knob Bezel

Tip

    • Remove the bezel by carefully inserting a small flat-bladed tool between the bezel (1) and the shift knob (3). Apply careful downward pressure to the bezel to separate the bezel from the shift knob.
    • Install the bezel by lifting the bezel (1) up to the shift knob (3) until a click sound is heard indicating the bezel is secured to the shift knob.

2

Shift Control Knob Screw

Caution: Refer to Fastener Caution in the Preface section.

Tip
Loosen the shift control knob screw approximately 3-4 turns. It is not necessary to fully remove the screw from the shift control knob.

Tighten
2 N·m (18 lb in)

3

Shift Control Knob