GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2009 🢒 SRX 🢒 Seats 🢒 Power Seats 🢒 Rear Seat Number 2 Seat Back Presence Sensor Replacement

Removal Procedure
  1. Remove the seat back panel. Refer to Rear Seat Number 2 Back Cushion Panel Replacement.

    2. Object Number: 1260910 Size: SH
  2. Disconnect the electrical connectors (1) from the panel.
  3. Remove the fasteners from the seat back presence sensor.
  4. Remove the sensor.

Installation Procedure
  1. Install the seat back presence sensor to the seat back panel.

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install the seat back presence sensor bolts to the seat back panel.

    3. Tighten
    Tighten the bolts to 9 N·m (80 lb in).


    Object Number: 1260910 Size: SH
  3. Connect the electrical connectors (1) to the seat back panel.
  4. Install the seat back panel. Refer to Rear Seat Number 2 Back Cushion Panel Replacement.
  5. Calibrate the seat. Refer to Power Folding Seat Calibration.