Sunroof Cable Drive Tube Replacement Front Window

1. Open the front sunshade to the full open position.



2. Remove the center window (2). Refer to Sunroof Window Replacement .
3. Remove the front sunroof window. Refer to Sunroof Window Replacement .



4. Remove the front sunroof motor/actuator (4). Refer to Sunroof Motor/Actuator Replacement .
5. Remove the front sunshade assembly. Refer to Sunroof Sunshade Assembly Replacement .



6. Remove either the front left or front right sunroof front window track (3). Refer to Sunroof Window Front Track Assembly Replacement .
7. Cut the tie straps securing the electrical harness to the drive tubes. Discard the tie straps.



8. Release the drive tube (1) from the motor/actuator block. Use a flat-bladed tool to release the drive tubes.
9. Hold onto the motor block and gently pry the drive tube from the motor block.
10. Carefully remove the drive tube from the motor/actuator compartment.

1. Position the drive tube (2) to the motor block (3).



2. Use a standard pair of pliers (2) to carefully secure the drive tube (1) to the motor block.



3. Loosely install 2 motor/actuator screws into the block in order to hold the block into position until the front track (3) rear extension (2) is installed
4. Install either the front left or front right sunroof front window track (3). Refer to Sunroof Window Front Track Assembly Replacement .



5. Install the front sunshade assembly (3). Refer to Sunroof Sunshade Assembly Replacement .
6. Remove the 2 motor/actuator screws from the motor block.



7. Install the front window motor/actuator (4). Refer to Sunroof Motor/Actuator Replacement .
8. Use new tie straps to secure the electrical harness to the drive tubes.
9. Install the front sunroof window. Refer to Sunroof Window Replacement .



10. Install the center window (2). Refer to Sunroof Window Replacement .
11. Close the front sunshade.
12. Perform the front window/sunshade initialization process. Refer to Sunroof Front Window/Sunshade Initialization Process .

Sunroof Cable Drive Tube Replacement Rear Vent Window

1. Open the rear sunshade to the full open position.



2. Remove the center window (2). Refer to Sunroof Window Replacement .
3. Remove the rear sunroof vent window. Refer to Sunroof Window Replacement .



4. Remove the rear sunroof motor/actuator (1). Refer to Sunroof Motor/Actuator Replacement .
5. Remove the rear sunshade assembly. Refer to Sunroof Sunshade Assembly Replacement .



6. Remove either the rear left or rear right sunroof rear window track (3). Refer to Sunroof Window Front Track Assembly Replacement .
7. Cut the tie straps securing the electrical harness to the drive tubes. Discard the tie straps.



8. Release the drive tube (1) from the motor/actuator block. Use a flat-bladed tool to release the drive tubes.
9. Hold onto the motor block and gently pry the drive tube from the motor block.
10. Carefully remove the drive tube from the motor/actuator compartment.

1. Position the drive tube (2) to the motor block (3).



2. Use a standard pair of pliers (2) to carefully secure the drive tube (1) to the motor block.



3. Loosely install 2 motor/actuator screws into the block in order to hold the block into position until the rear track (3) rear extension (2) is installed.



4. Install either the rear left or rear right sunroof rear window track (3). Refer to Sunroof Window Front Track Assembly Replacement .



5. Install the rear sunshade assembly (2). Refer to Sunroof Sunshade Assembly Replacement .



6. Install the rear window motor/actuator (1). Refer to Sunroof Motor/Actuator Replacement .
7. Use new tie straps to secure the electrical harness to the drive tubes.
8. Install the rear sunroof vent window. Refer to Sunroof Window Replacement .



9. Install the center window (2). Refer to Sunroof Window Replacement .
10. Close the rear sunshade.
11. Perform the rear vent window/sunshade initialization process. Refer to Sunroof Rear Window Initialization Process .