GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2009 🢒 SRX 🢒 Power and Signal Distribution 🢒 Data Communications 🢒 Television Antenna Module Replacement

Removal Procedure
  1. Remove the right rear body side trim panel. Refer to Body Side Rear Trim Panel Replacement.

    2. Object Number: 1211149 Size: SH
  2. Remove the nuts (1) securing the module to the vehicle.
  3. Disconnect the electrical connectors.
  4. Remove the module.

Installation Procedure

    Object Number: 1211149 Size: SH
  1. Connect the electrical connectors.
  2. Locate the module the vehicle.

    3. Caution: Refer to Fastener Caution in the Preface section.

  3. Install the nuts (1) securing the processor to the vehicle.

    4. Tighten
    Tighten the nuts to 9 N·m (80 lb in).

  4. Install the right rear body side trim panel. Refer to Body Side Rear Trim Panel Replacement.