GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2009 🢒 SRX 🢒 Power and Signal Distribution 🢒 Data Communications 🢒 Front Seat Heater Control Module Replacement

Removal Procedure

    Warning: Refer to SIR Warning in the Preface section.


    Object Number: 792015 Size: SH
  1. Remove the front seat cushion. Refer to Front Seat Cushion Replacement.
  2. Disconnect the electrical connector from the heated seat module.
  3. Remove the heated seat module screws (2) and remove the module.

Installation Procedure

    Caution: Refer to Fastener Caution in the Preface section.


    Object Number: 792015 Size: SH
  1. Install the heated seat control module and install the retaining screws (2).

    2. Tighten
    Tighten the screws to 2 N·m (18 lb in).

  2. Connect the electrical connector.
  3. Install the seat cushion. Refer to Front Seat Cushion Replacement.