GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Remove the cross car brace. Refer to Cross Vehicle Brace Replacement .

  2. Object Number: 1201042  Size: SH
  3. Disengage the cover/shield from the ball studs by pulling up firmly on the right rear and left front of the engine cover.
  4. Remove the engine cover/sight shield.

Installation Procedure


    Object Number: 1201042  Size: SH
  1. Position the engine cover/sight shield over the intake manifold so the grommets are aligned with the ball studs.
  2. Press the engine cover/sight shield down firmly near the ball studs in order to install the engine cover/sight shield.
  3. Install the cross car brace. Refer to Cross Vehicle Brace Replacement .