1

NEW Fluid Pump Seal

2

Torque Converter (with Fluid Pump) Housing Assembly

Notice: Ensure the turbine shaft (O-ring) seal is not installed prior to installing the torque converter housing assembly. The seal may become cut or damaged during installation of the torque converter housing assembly.

3

Bolts M8 x 1.25 x 50 (Qty: 8)

Notice: Refer to Fastener Notice in the Preface section.

Procedure

Tighten in sequence shown.

Tighten
31 N·m (23 lb ft)

4

NEW Turbine Shaft (O-Ring) Seal