For 1990-2009 cars only
Removal Procedure
- Apply 2 layers of masking tape on the windshield next to the reveal molding being serviced.
- Starting from the top, using a plastic flat-bladed tool, pry up the reveal molding at the 2 retainer clip locations.
- Remove the reveal molding from the vehicle.
- If the molding is bent or damaged, replace the molding.
Installation Procedure
- If the windshield reveal molding retainer clips are bent or damaged, replace the clips.
- Align the top end of the reveal molding to the end cap tongue inside the opening of the roof rail.
- Swing the reveal molding downward and align the molding with the clips.
- Press down on the side reveal molding evenly in order to engage the molding to the windshield retainer clips.
- Remove the masking tape.
- Clean the tape residue from the windshield.
