Electronic Brake Control Module Programming and Setup. Cadillac SLS 2009

For 1990-2009 cars only

Makes 🢒 Cadillac 🢒 2009 🢒 SLS 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Electronic Brake Control Module Programming and Setup

If the electronic brake control module (EBCM) is replaced, the following procedures must be performed:

•	EBCM Reprogramming--Refer to Service Programming System (SPS).

•	Recalibrate the brake pedal position (BPP) sensor. Refer to Brake Pedal Position Sensor Replacement.

If the EBCM needs to be reprogrammed, refer to Service Programming System (SPS).