GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2008 🢒 SLS 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Turn Signal Multifunction Switch Replacement

Removal Procedure

    Caution: Refer to SIR Caution in the Preface section.

  1. Disable the SIR system. Refer to SIR Disabling and Enabling Zone 3 .
  2. Remove the steering column trim covers. Refer to Steering Column Trim Covers Replacement.

    3. Object Number: 420196 Size: SH
  3. Remove the retaining screws from the multifunction switch.
  4. Disconnect the multifunction switch electrical connections.
  5. Remove the multifunction switch.

Installation Procedure
  1. Connect the multifunction switch electrical connectors.
  2. Install the multifunction switch to the steering column.

    3. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 420196 Size: SH
  3. Install the retaining screws to the multifunction switch.

    4. Tighten
    Tighten the screw to 7 N·m (62 lb in).

  4. Install the steering column trim cover. Refer to Steering Column Trim Covers Replacement.
  5. Enable the SIR. Refer to SIR Disabling and Enabling Zone 3 .