Rear Seat Number 2 Hinge Finish Cover Replacement. Cadillac Escalade

For 1990-2009 cars only

Makes 🢒 Cadillac 🢒 2009 🢒 Escalade - 2WD 🢒 Seats 🢒 Seat Hardware, Trim, and Upholstery 🢒 Rear Seat Number 2 Hinge Finish Cover Replacement

Callout	Component Name
Preliminary Procedure Remove the Rear Seat No. 2 Back Cushion Cover. Refer to Rear Seat Number 2 Back Cushion Cover and Pad Replacement.
1	Rear Seat Hinge Finish Cover Screw (Qty: 2) Caution: Refer to Fastener Caution in the Preface section. Tighten 2 N·m (18 lb in)
2	Rear Seat Hinge Finish Cover Tip Slide the belt out through the slit in the back of the bezel.

Callout

Component Name

Rear Seat Hinge Finish Cover Screw (Qty: 2)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
2 N·m (18 lb in)

Rear Seat Hinge Finish Cover

Tip
Slide the belt out through the slit in the back of the bezel.