GM Service Manual Online
For 1990-2009 cars only

Auxiliary Blower Motor Replacement Standard Wheelbase


Object Number: 1689365  Size: MF

Callout

Component Name

Preliminary Procedure

  1. Remove the right rear quarter trim panel. Refer to Rear Quarter Trim Panel Replacement - Right Side.
  2. Disconnect the blower motor electrical connector.

1

Locking Tab (Qty: 2)

Procedure

  1. Remove one attaching screw securing blower motor if applicable
  2. Carefully pull back locking tabs on blower motor assembly.

2

Auxiliary Blower Motor Assembly

Procedure

Rotate blower motor counterclockwise to remove.

Auxiliary Blower Motor Replacement Extended Wheelbase


Object Number: 1681994  Size: MF

Callout

Component Name

Preliminary Procedure

  1. Remove the right rear quarter trim panel. Refer to Rear Quarter Trim Panel Replacement - Right Side.
  2. Disconnect the blower motor electrical connector.

1

Blower Motor Screw (Qty: 3)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
1.5 N·m (13 lb in)

2

Blower Motor Assembly