Preliminary Procedure

Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.

1

Two/Four Wheel Drive Actuator Bolts (Qty: 4)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
18 N·m (13 lb ft)

2

Two/Four Wheel Drive Actuator

3

Two/Four Wheel Drive Actuator Seal

Procedure

1. Use J 45278 and J 23907 to remove the seal from the actuator.
2. Use the J 44907 to install the seal to the actuator.

Tip
Remove the seal from the actuator ONLY if seal replacement is necessary.

Special Tools