Torque Converter Housing with Fluid Pump Assembly (2)
|
| • | Inspect for worn, sticking, or damaged pressure regulator valve (233). |
| • | Inspect for worn, sticking, or damaged pressure regulator valve outer spring (234). |
| • | Inspect for worn, sticking, or damaged pressure regulator valve inner spring (235). |
| • | Inspect for worn, sticking, or damaged isolator valve (236) and sleeve (237). |
| • | Inspect for worn, sticking, or damaged pressure relief ball valve (225). |
| • | Inspect for worn, sticking, or damaged pressure relief ball valve spring (224). |
| • | Inspect for damaged or porous pump cover assembly (219). Inspect for pump surfaces not flat. |
| • | Inspect for excessive fluid pump rotor (217) clearance or damage. Ensure proper selective rotor is being utilized. |
| • | Inspect for damaged fluid pump slide (212). Ensure proper selective slide is being utilized. |
| • | Inspect for worn, sticking, or damaged fluid pump slide outer spring (211). |
| • | Inspect for worn or damaged fluid pump slide seal (213), seal support (214), pivot pin (215), fluid seal ring (209), and O-ring seal (210). |
| • | Inspect for worn or damaged fluid pump vane rings (207) and rotor guide (208). |
|
Control Valve Upper Body Assembly (321)
|
| • | Inspect for worn, sticking, or damaged actuator feed limit valve (325) and spring (324). |
| • | Inspect for worn, sticking, or damaged clutch boost valve (329) and spring (330). |
|
