Notice: In order to avoid actuator damage, DO NOT apply power to the actuator when it is not installed in the HVAC module.

Preliminary Procedure

1. Remove the right rear quarter trim panel. Refer to Rear Quarter Trim Panel Replacement - Right Side .
2. Disconnect the electrical connector from the mode actuator.

1

Mode Actuator Screw - Auxiliary (Qty: 2)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
2.5 N·m (16 lb in)

2

Mode Actuator - Auxiliary

Procedure

Re-calibrate the mode actuator. Refer to Actuator Recalibration .