Indicators
Symbol | Reference |
|---|---|
| ABS: Refer to ABS Description and Operation |
| Air Bag: Refer to SIR System Description and Operation |
(Canada) 
BRAKE (U.S.) | Brake: Refer to Brake Warning System Description and Operation |
| Charge: Refer to Charging System Description and Operation |
(Canada) CRUISE (U.S.) | CRUISE: Refer to Cruise Control Description and Operation |
| Fasten Safety Belt: Refer to Seat Belt System Description and Operation |
| Front Fog Lamps: Refer to Exterior Lighting Systems Description and Operation |
| High Beam: Refer to Exterior Lighting Systems Description and Operation |
| Lights On: Refer to Exterior Lighting Systems Description and Operation |
| Low Engine Oil Pressure: The instrument panel cluster (IPC) illuminates the OIL PRESSURE LOW message in the driver information center (DIC) when the engine control module (ECM) detects a low oil pressure condition. |
|
PARK BRAKE | Park Brake: Refer to Park Brake System Description and Operation |
| Rear Fog Lamps: Refer to Exterior Lighting Systems Description and Operation |
(Canada) SECURITY (U.S.) | SECURITY: Refer to Content Theft Deterrent (CTD) Description and Operation |
(Canada) SERVICE ENGINE SOON (U.S.) | Malfunction Indicator Lamp (MIL): Refer to Engine Control Module Description for the 4.8L, 5.3L, 6.0L and 6.2L engine |
| Tire Pressure Monitor: Refer to Tire Pressure Monitor Description and Operation |
| TOW/HAUL: Refer to Transmission Indicators and Messages for the 6L80-E transmission or Transmission Indicators and Messages for the 4L60-E/4L65-E/4L70-E transmission |
| Turn Signals: Refer to Exterior Lighting Systems Description and Operation |
| VDC: Refer to ABS Description and Operation |
DIC Warning Messages
Message | Reference |
|---|---|
ALL WHEEL DRIVE DISABLED | Refer to Transfer Case Description and Operation for the NVG 246-NP8 transfer case or Transfer Case Description and Operation for the BW 4485-NR3 transfer case |
AUTOMATIC LIGHT CONTROL OFF | Refer to Exterior Lighting Systems Description and Operation |
AUTOMATIC LIGHT CONTROL ON | Refer to Exterior Lighting Systems Description and Operation |
BATTERY SAVER ACTIVE | |
BRAKE FLUID LOW ADD BRAKE FLUID | |
BUCKLE PASSENGER SEATBELT | |
BUCKLE SEATBELT | |
CHANGE ENGINE OIL SOON | The instrument panel cluster (IPC) illuminates the CHANGE ENGINE OIL SOON message when the engine control module (ECM) determines that the engine oil should be changed. Refer to GM Oil Life System Resetting . |
CHECK LEFT FRONT TIRE PRESSURE | |
CHECK LEFT REAR TIRE PRESSURE | |
CHECK RIGHT FRONT TIRE PRESSURE | |
CHECK RIGHT REAR TIRE PRESSURE | |
CHECK SPARE TIRE PRESSURE | |
COOLANT LEVEL LOW ADD COOLANT | |
DRIVER DOOR OPEN | |
ENGINE HOT TURN A/C OFF | |
ENGINE POWER IS REDUCED | Refer to Engine Control Module Description for the 4.8L, 5.3L, 6.0L and 6.2L engine |
ENGINE OIL LOW ADD OIL | The instrument panel cluster (IPC) illuminates the ENGINE OIL LOW message in the driver information center (DIC) when the engine control module (ECM) detects a low engine oil level condition. |
ENGINE OVERHEATED STOP ENGINE | |
FUEL LEVEL LOW | The instrument panel cluster (IPC) illuminates the FUEL LEVEL LOW message in the driver information center (DIC) and the LOW FUEL indicator when the IPC detects that the fuel level is less than a pre-determined value. |
HOOD OPEN | |
KM/H | The IPC displays the km/h indicator when the IPC detects that metric units have been requested. |
LEFT REAR DOOR OPEN | |
MPH | MPH: The instrument panel cluster (IPC) displays the MPH indicator when the cluster detects that English units have been requested. |
OIL PRESSURE LOW STOP ENGINE | The IPC displays this message in the DIC when the ECM detects that the oil pressure is very low and the engine has to be stopped. |
PARK ASSIST FAULT CLEAN REAR BUMPER | |
PARK ASSIST OFF | |
PASSENGER DOOR OPEN | |
PROGRAM CLUSTER | The instrument panel cluster (IPC) illuminates the PROGRAM CLUSTER message in the driver information center (DIC) when the IPC needs to be programmed. Refer to Instrument Cluster Programming and Setup for setup and programming. |
REAR ACCESS OPEN | Refer to Liftgate/Liftgate Window Ajar Indicator Description and Operation |
REMOTE KEY LEARNING ACTIVE | |
REMOTE KEY LEARNING COMPLETE | |
REPLACE BATTERY IN REMOTE KEY | |
RIGHT REAR DOOR OPEN | |
SERVICE ALL WHEEL DRIVE | Refer to Transfer Case Description and Operation for the NVG 246-NP8 transfer case or Transfer Case Description and Operation for the BW 4485-NR3 transfer case |
SERVICE AIR BAG | Refer to SIR System Description and Operation |
SERVICE BATTERY CHARGING SYSTEM | |
SERVICE BRAKE BOOSTER | |
SERVICE PARK ASSIST | |
SERVICE STABILITRAK | Refer to ABS Description and Operation |
SERVICE SUSPENSION SYSTEM | Refer to Electronic Suspension Control Description and Operation . |
SERVICE THEFT DETERRENT SYSTEM | |
SERVICE TIRE MONITOR SYSTEM | |
SERVICE TRACTION CONTROL | Refer to ABS Description and Operation |
STABILITRAK OFF | Refer to ABS Description and Operation |
STARTING DISABLED SERVICE THROTTLE | |
THEFT ATTEMPTED | Refer to Content Theft Deterrent (CTD) Description and Operation |
TIGHTEN GAS CAP | The instrument panel cluster (IPC) illuminates the TIGHTEN GAS CAP message in the driver information center (DIC) when the engine control module (ECM) detects a low fuel pressure condition. |
TIRE LEARNING ACTIVE | |
TRACTION CONTROL OFF | Refer to ABS Description and Operation |
TRANSMISSION HOT IDLE ENGINE | Refer to Transmission Indicators and Messages for the 4L60-E transmission or Transmission Indicators and Messages for the 4L60-E/4L65-E/4L70-E transmission |
TURN SIGNAL ON | Refer to Exterior Lighting Systems Description and Operation |
VEHICLE OVERSPEED | The instrument panel cluster (IPC) illuminates the VEHICLE OVERSPEED indicator when the IPC detects that the vehicle speed is more than 120 km/h (75 mph). |
WASHER FLUID LOW ADD FLUID |
KM/H
The instrument panel cluster (IPC) displays the km/h indicator when the cluster detects that Metric units have been requested.
SHIFT INDICATOR
The instrument panel cluster (IPC) illuminates the shift indicator when the engine control module (ECM) determines that the vehicle should be shifted to the next higher gear. The IPC receives a class 2 message from the ECM requesting illumination.
