GM Service Manual Online
For 1990-2009 cars only

    Object Number: 1707456  Size: SH
  1. Loosen the jam nut on the inner tie rod (1).
  2. Rotate the inner tie rod (2) to the required toe specification setting. Refer to Wheel Alignment Specifications .
  3. Notice: Refer to Fastener Notice in the Preface section.

  4. Tighten the jam nut (1) on the tie rod.
  5. Tighten
    Tighten the tie rod jam to 75 N·m (55 lb ft).

  6. Check the toe setting after tightening.
  7. Re-adjust the toe setting if necessary.