Hourmeter Inaccurate or Inoperative. Cadillac Escalade

For 1990-2009 cars only

Makes 🢒 Cadillac 🢒 2007 🢒 Escalade - 2WD 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Hourmeter Inaccurate or Inoperative

Diagnostic Instructions

•	Perform the Diagnostic System Check - Vehicle prior to using this diagnostic procedure.

•	Review Strategy Based Diagnosis for an overview of the diagnostic approach.

•	Diagnostic Procedure Instructions provides an overview of each diagnostic category.

The instrument panel cluster (IPC) can display the accumulated engine run time hours when the cluster is in the OFF AWAKE or ACC, RAP and in the RUN positions. The IPC stores the accumulated engine run time hours in a non-volatile format. The hourmeter will update every 6 minutes and will not change if the battery is disconnected or removed.

Reference Information

Schematic Reference

Instrument Cluster Schematics

Connector End View Reference

Displays and Gages Connector End Views

Electrical Information Reference

•	Circuit Testing

•	Connector Repairs

•	Testing for Intermittent Conditions and Poor Connections

•	Wiring Repairs

Scan Tool Reference

Scan Tool Data List

Circuit/System Testing

With the engine running, verify that the time on the hourmeter increments properly.

⇒	If the time does not increment properly, replace the IPC.

Repair Instructions

Perform the Diagnostic Repair Verification after completing the diagnostic procedure.

•	Instrument Cluster Description and Operation

•	Control Module References for IPC and ECM replacement, setup, and programming