GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 833288  Size: SH
  1. Remove the front door trim panel. Refer to Front Side Door Trim Panel Replacement .
  2. Disconnect the electrical connectors.
  3. Remove the screw that retains the switch panel bezel (1) from the front door panel.

  4. Object Number: 811888  Size: SH
  5. Remove the switch panel bezel from the door panel using a flat-bladed tool.

  6. Object Number: 833442  Size: SH
  7. Using a wide plastic flat-bladed tool, release the retaining clips on both sides of the door module.
  8. Remove the door module from the switch panel bezel.

Installation Procedure


    Object Number: 833442  Size: SH
  1. Install the door module into the switch panel bezel until it snaps into place.

  2. Object Number: 811888  Size: SH
  3. Install the switch panel bezel and module to the door panel.
  4. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 833288  Size: SH
  5. Install the screw that retains the switch panel bezel (1) to the front door panel.
  6. Tighten
    Tighten the screw to 2 N·m (18 lb in).

  7. Connect the electrical connectors.
  8. Install the front door trim panel. Refer to Front Side Door Trim Panel Replacement .
  9. If equipped with camper mirrors program the door module. Refer to Service Programming System (SPS).
  10. Refer to Control Module References for programming and setup information.