Preliminary Procedure

1. Remove the air conditioning compressor belt. Refer to Air Conditioning Compressor Belt Replacement.
2. Remove the air conditioning compressor if necessary. Refer to Air Conditioning Compressor Replacement.
3. Disconnect the electrical connector from the air conditioning compressor.

1

Air Conditioning Compressor Pulley Bolt

Caution: Refer to Fastener Caution in the Preface section.

Tighten
18 N·m (13 lb ft)

2

Air Conditioning Clutch Drive Plate

Procedure

Measure and adjust the air conditioning compressor clutch drive plate per specification. Refer to Air Conditioning Clutch Drive Plate Adjustment.

3

Air Conditioning Compressor Clutch Drive Plate Adjustment Shim

4

Air Conditioning Compressor Clutch Pulley Snap Ring

Procedure

Ensure the clutch pulley snap ring is installed with the flat side toward the air compressor. Note the rounded off portion of the snap ring per illustration, will be on the right side upon proper installation.

5

Air Conditioning Compressor Clutch Pulley

6

Air Conditioning Compressor Clutch Coil Snap Ring

Procedure

Ensure the clutch coil snap ring is installed with the flat side toward the air compressor. Note the larger portion of the snap ring per illustration, will be on the right side upon proper installation.

7

Air Conditioning Compressor Clutch Coil