GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2005 🢒 Escalade ESV 🢒 Body 🢒 Doors 🢒 Door Wiring Harness Replacement

Removal Procedure
  1. Remove the hinge pillar trim panel. Refer to Body Hinge Pillar Trim Panel Replacement in Interior Trim.

    2. Object Number: 375036 Size: SH
  2. Disconnect the cross car wiring harness.
  3. Remove the conduit.
  4. Remove the upper trim panel extension. Refer to Upper Extension Trim Panel Replacement .
  5. Remove the trim panel. Refer to Front Side Door Trim Panel Replacement .
  6. Remove the water deflector. Refer to Front Side Door Water Deflector Replacement .

    7. Object Number: 375037 Size: SH
  7. Disconnect the following components:
    8. • The outside power mirror (1)
    • C203 (4)
    • P500 (5)
    • The speaker (6)
    • The power window motor (7)
    • The power lock switch (8)
    • The power window switch (9)
    • The power mirror switch (10)
    • The door lock actuator
  8. Remove the door wiring harness from the door by pulling the harness through the conduit (3).

Installation Procedure
  1. Install the door wiring harness to the door by pulling connector 4 and connector 5 through the conduit (3).

    2. Object Number: 375037 Size: SH
  2. Connect the following components:
    3. • The outside power mirror (1)
    • C203 (4)
    • P500 (5)
    • The speaker (6)
    • The power window motor (7)
    • The power lock switch (8)
    • The power window switch (9)
    • The power mirror switch (10)
    • The door lock actuator
  3. Install the water deflector. Refer to Front Side Door Water Deflector Replacement .
  4. Install the trim panel. Refer to Front Side Door Trim Panel Replacement .
  5. Install the upper trim panel extension. Refer to Upper Extension Trim Panel Replacement .
  6. Install the conduit.

    7. Object Number: 375036 Size: SH
  7. Connect the cross car wiring harness.
  8. Install the hinge pillar trim panel. Refer to Body Hinge Pillar Trim Panel Replacement in Interior Trim.