Generator Bracket Replacement 4.8L, 5.3L, and 6.0L Engines

1. Remove the battery cable junction block bracket bolts.



2. Remove the generator. Refer to Generator Replacement .
3. Remove the power steering pump. Refer to Power Steering Pump Replacement in Power Steering System.
4. Remove the generator bracket bolts.
5. Remove the generator bracket.

1. Install the generator bracket.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

2. Install the generator bracket bolts.

Tighten
Tighten the bolts to 50 N·m (37 lb ft).

3. Install the power steering pump. Refer to Power Steering Pump Replacement in Power Steering System.
4. Install the generator. Refer to Generator Replacement .



5. Install the battery cable junction block bracket bolts.

Tighten
Tighten the bolts to 9 N·m (80 lb in).