GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2009 🢒 Escalade 🢒 Body Hardware and Trim 🢒 Interior Trim and Paneling 🢒 Body Lock Pillar Garnish Molding Replacement

Body Lock Pillar Garnish Molding Replacement Avalanche/Escalade EXT


Object Number: 1702684 Size: MF

Callout

Component Name

Preliminary Procedures

  1. Disable roof rail SIR system. Refer to SIR Disabling and Enabling.
  2. Remove rear side door sill plate. Refer to Rear Side Door Sill Plate Replacement.

1

Body Lock Pillar Garnish Molding Plug

2

Body Lock Pillar Garnish Molding Screw

Caution: Refer to Fastener Caution in the Preface section.

Tighten
2 N·m (18 lb in)

3

Removable Midgate Hinge Finish Cover

4

Rear Belt Assembly Anchor Bolt

Tighten
70 N·m (52 lb ft)

5

Body Lock Pillar Garnish Molding Assembly

Tighten
43 N·m (32 lb ft)

Tip

  1. Remove seat belt D-ring from the adjuster assembly.
  2. Route seat belt through garnish molding.

6

Body Lock Pillar Garnish Molding Retainer (Qty: 5)

Body Lock Pillar Garnish Molding Replacement Extended Wheelbase


Object Number: 1685182 Size: MF

Callout

Component Name

Preliminary Procedures

  1. Disable roof rail SIR system. Refer to SIR Disabling and Enabling.
  2. Remove rear side door sill plate. Refer to Rear Side Door Sill Plate Replacement.

1

Body Lock Pillar Garnish Molding Plug

2

Body Lock Pillar Garnish Molding Screw

Caution: Refer to Fastener Caution in the Preface section.

Tighten
2 N·m (18 lb in)

3

Body Lock Pillar Garnish Molding Assembly

Tighten
35 N·m (25 lb ft)

Tip

  1. Remove seat belt D-ring from the adjuster assembly.
  2. Route seat belt through garnish molding.

4

Body Lock Pillar Garnish Molding Clip (Qty: 10)

Body Lock Pillar Garnish Molding Replacement Standard Wheelbase


Object Number: 1657790 Size: MF

Callout

Component Name

Preliminary Procedures

  1. Disable the roof rail SIR system. Refer to SIR Disabling and Enabling.
  2. Remove the rear side door sill plate. Refer to Rear Side Door Sill Plate Replacement.
  3. Fold the rear seat up and forward.
  4. Reposition the rear side door weatherstrip off the molding.

1

Body Lock Pillar Garnish Molding Plug

2

Body Lock Pillar Garnish Molding Screw

Caution: Refer to Fastener Caution in the Preface section.

Tighten
2 N·m (18 lb in)

3

Body Lock Pillar Garnish Molding Assembly

Tighten
35 N·m (25 lb ft)

Tip

  1. If equipped with rear folding seat, disconnect the electrical connectors.
  2. Remove seat belt D-ring from the adjuster assembly.
  3. Route seat belt through garnish molding.

4

Body Lock Pillar Garnish Molding Clip (Qty: 10)