GM Service Manual Online
For 1990-2009 cars only

Passenger Side Air Bag Door Not Flush With Dash Pad/Warped (Reposition Locking Tabs on Air Bag Panel)

Subject:Passenger Side Air Bag Door Not Flush With Dash Pad/Warped (Reposition Locking Tabs On Air Bag Panel)

Models:2007-2008 Cadillac Escalade, Escalade ESV, Escalade EXT
2007-2008 Chevrolet Avalanche, Silverado, Suburban, Tahoe
2007-2008 GMC Sierra, Yukon, Yukon Denali, Yukon XL, Yukon XL Denali
2006-2008 Pontiac Solstice
2007-2008 Saturn Sky
2008 Opel GT



This bulletin is being revised to add the 2008 model year and the Opel GT model. Please discard Corporate Bulletin Number 06-09-41-004B (Section 09 - Restraints).


Do This

Don't Do This

Reposition the locking tabs.

Do not replace the air bag.

Condition

Some customers may comment that the air bag door does not sit flush with the instrument panel (dash pad) or that the door appears warped.

Cause

This condition may be caused by a trim locking tab that is not fully engaged in the mounting bracket.

Correction

Reposition the trim locking tabs on the air bag panel following the procedure below.

Important: This repair is for appearance reasons only and has no effect on the operation or performance of the air bag.

  1. Disable the SIR system. Refer to Inflatable Restraint Instrument Panel Module Replacement for Disabling and Enabling the SIR system.

  2. Object Number: 1832642  Size: SH
  3. The locking tab will be bent upward. Using a plastic trim stick, gently move the panel up to expose the deformed locking tab.

  4. Object Number: 1831607  Size: SH
  5. Straighten the locking tab using the plastic trim stick.
  6. Press down on the air bag panel to seat it in the correct position.
  7. Enable the SIR system. Refer to Inflatable Restraint Instrument Panel Module Replacement for Disabling and Enabling the SIR system.

Warranty Information

For vehicles repaired under warranty, use:

Labor Operation

Description

Labor Time

C9762*

Align Locking Tab Air Bag Panel - I/P

0.3 hr

*This labor operation number is for bulletin use only. This number will not be published in the Labor Time Guide.