GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2008 🢒 Escalade 🢒 Bulletins 🢒 Engineering Information Request During Rear Ring And Pinion Replacement - keywords gear hum moan noise whine vibration

Engineering Information Request During Rear Ring And Pinion Replacement - keywords gear hum moan noise whine vibration

Subject:Engineering Information Request During Rear Ring and Pinion Replacement

Models:2007-2008 Cadillac Escalade, Escalade ESV, Escalade EXT
2007-2008 Chevrolet Avalanche, Silverado, Suburban, Tahoe
2007 Chevrolet Silverado Classic
2007-2008 GMC Sierra, Sierra Denali, Yukon, Yukon Denali, Yukon XL
2007 GMC Sierra Classic
Equipped With a 8.6 American Axle (AAM)


The following diagnosis might be helpful if the vehicle exhibits the symptom(s) described in this PI.

Condition/Concern:

Engineering is conducting an investigation on 8.6 rear differential ring and pinion gear sets that are replaced under warranty.

Recommendation/Instructions:

Please provide the axle code (prefix), build location, Julian date and serial number on the Repair Order whenever replacing a ring and pinion and using labor operation code F2383. See the attached photo for identification. The location of the stamping can be found either on the top or the front of the right axle tube.


Object Number: 2000430 Size: SH
  1. Axle Prefix
  2. Build Location
  3. Julian Date
  4. Serial Number

Please follow this diagnostic or repair process thoroughly and complete each step. If the condition exhibited is resolved without completing every step, the remaining steps do not need to be performed.