Electronic Traction Control Switch Replacement Stabilitrak

1. Remove the instrument panel (I/P) bezel. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement in Instrument Panel, Gages and Console.



2. Gently lift the retaining tabs (2) and remove the stabilitrak switch (3) from the I/P assembly (1).



3. Disconnect the harness connector from the stabilitrak switch.

1. Connect the harness connector to the stabilitrak switch.



2. Install the stabilitrak switch (3) into the I/P assembly (1)
3. Ensure that the switch is secure into both retaining tabs (2).
4. Install the I/P bezel. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement in Instrument Panel, Gages and Console.

Electronic Traction Control Switch Replacement Traction Control

1. Remove the instrument panel (I/P) bezel. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement in Instrument Panel, Gages and Console.



2. Gently lift the switch retaining tabs (1) and remove the traction control switch (2) from the I/P assembly (3).
3. Disconnect the harness connector from the traction control switch.

1. Connect the harness connector to the traction control switch.



2. Install the traction control switch (2) into the instrument panel (IP) assembly (3), making sure that all of the switch retaining tabs (1) are engaged.
3. Install the I/P bezel. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement in Instrument Panel, Gages and Console.