The latched side window is a one-piece assembly that includes the following:

1. Remove the latch screw.
2. Remove the hinge screws.
3. Disconnect the window assembly.

Do not replace the weatherstrip/window frame unless it is damaged.

If damaged, the weatherstrip/window frame must be cut out and replaced.

1. Connect the window assembly.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

2. Install the hinge screws.

Tighten
Tighten the hinge screws to 2 N·m (18 lb in).

3. Install the latch screws.

Tighten
Tighten the latch screws to 2 N·m (18 lb in).