GM Service Manual Online
For 1990-2009 cars only

Step

Action

Value(s)

Yes

No

DEFINITION: This diagnostic procedure should only be used to diagnose the turn signal indicators only if the turn signals and the other IP cluster indicators are operative.

1

Was the Exterior Lamp System Check performed?

--

Go to Step 2

Go to Exterior Lights System Check

2

  1. Remove the instrument cluster.
  2. Connect a test lamp between cavity 3 or 32 and ground.
  3. Turn the ignition to the ON position.
  4. Place the turn signal switch to the LH or RH turn position.

Does the test lamp flash?

--

Go to Step 3

Go to Step 4

3

  1. Check the condition of the indicator bulb(s) and replace as necessary.
  2. If the indicator bulb(s) are good, replace the instrument cluster. Refer to Instrument Cluster Replacement .
  3. Is the repair complete?

--

Go to Exterior Lights System Check

--

4

Repair open(s) in CKT(s) 14 (LT BLU) and/or 15(DK BLU). Refer to Wiring Repairs in Wiring Systems.

Is the repair complete?

--

Go to Exterior Lights System Check

--