Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you perform the DRL System Check? | -- | Go to Step 2 | |
2 | Turn the ignition switch to the RUN position. Is the daytime running lamps (DRL) indicator lit? | -- | Go to Step 3 | Go to Step 5 |
3 | Disconnect the DRL module. Is the DRL indicator lit? | -- | Go to Step 4 | Go to Step 6 |
4 | Disconnect the instrument cluster connector. Do the DRL disable? | -- | Go to Step 7 | Go to Step 8 |
5 | Remove the DRL relay from the convenience center. Do the DRL disable? | -- | Go to Step 9 | Go to Step 10 |
6 | Replace the DRL module. Refer to Daytime Running Lights (DRL) Control Module Replacement . Is the repair complete? | -- | -- | |
7 | Replace the instrument cluster. Refer to Instrument Cluster Replacement in Instrument Panel, Gauges and Console. Is the repair complete? | -- | -- | |
8 | Repair the short to ground in CKT 592 between the instrument cluster and the convenience cluster. Is the repair complete? | -- | -- | |
9 | Replace the DRL relay. Refer to Daytime Running Lamps (DRL) Relay Replacement . Is the repair complete? | -- | -- | |
10 | Repair the short to voltage in CKT 12 (TAN) between the convenience center and the left high/low beam headlamp (base headlamps) and the left high beam headlamp (quad headlamps). Is the repair complete? | -- | -- |
