GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2000 🢒 Escalade 🢒 Brakes 🢒 Park Brake 🢒 Parking Brake Indicator Switch Replacement

Removal Procedure

    Object Number: 606395 Size: SH
  1. Disconnect the electrical connector.
  2. Depress the park brake pedal.
  3. Remove the park brake warning lamp switch retaining screw.
  4. Remove the park brake indicator switch from the vehicle.

Installation Procedure

    Object Number: 606395 Size: SH
  1. Install the park brake indicator switch onto the locator pin at the park brake pedal.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the retaining screw.

    3. Tighten
    Tighten the retaining screw to 4 N·m (35 lb in).

  3. Connect the electrical connector.
  4. Release the park brake.