Shock Absorber Replacement C Model

Notice: Original equipment shock absorbers serve additionally as suspension drop cutoffs. Replacement shock absorbers must have a built in suspension cutoff feature and must not be longer than original shocks when they are fully extended or serious vehicle or component damage could result.

1. Raise the vehicle on a hoist.



2. Remove the following parts from the frame bracket:

•	The upper shock nut (3)

•	The bolt (1)

3. Remove the following parts from the axle bracket:

•	The lower shock nut (6)

•	The washer (5)

•	The bolt (2)

4. Remove the shock absorber (4) from the vehicle.

1. Install the shock absorber (4) to the vehicle.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

2. Install the following parts:

2.1.	The upper shock bolt (2)

2.2.	The washer (5)

2.3.	The lower nut (6)

Tighten
Tighten the lower nut to 70 N·m (52 lb ft).

2.4.	The upper shock bolt (1)

2.5.	The upper nut (3)

Tighten
Tighten the upper nut to 15 N·m (11 lb ft).

Shock Absorber Replacement K Model

Notice: Original equipment shock absorbers serve additionally as suspension drop cutoffs. Replacement shock absorbers must have a built in suspension cutoff feature and must not be longer than original shocks when they are fully extended or serious vehicle or component damage could result.

1. Raise the vehicle on a hoist.



2. Remove the following parts from the frame bracket:

•	The upper shock nut (5)

•	The bolt (6)

3. Remove the following parts from the axle bracket:

•	The lower shock nut (1)

•	The washer (2)

•	The bolt (3)

4. Remove the shock absorber (4) from the vehicle.

1. Install the shock absorber (4) to the vehicle.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

2. Install the following parts:

2.1.	The lower shock bolt (3)

2.2.	The washer (2)

2.3.	The lower nut (1)

Tighten
Tighten the lower nut to 100 N·m (74 lb ft).

2.4.	The upper shock bolt (6)

2.5.	The upper nut (5)

Tighten
Tighten the upper nut to 17 N·m (13 lb ft).