GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2002 🢒 Eldorado 🢒 Engine 🢒 Engine Controls - 4.6L 🢒 Fuel Tank Filler Hose Replacement

Removal Procedure
  1. Drain the fuel tank. Refer to Fuel Tank Draining .
  2. Raise the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.

    3. Object Number: 747554 Size: SH
  3. Loosen the fuel fill hose clamps (3).
  4. Remove the fuel fill hose (2).

Installation Procedure

    Object Number: 747554 Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  1. Install the fuel fill hose (2) to the fuel tank (1) and the fuel fill tube.

    2. Tighten
    Tighten the clamps to 2.5 N·m (22 lb in).

  2. Lower the vehicle.
  3. Add fuel to the fuel tank.
  4. Install the fuel fill cap.