For 1990-2009 cars only
Circuit Description
This DTC identifies a malfunction within the EBTCM.
Conditions for Setting the DTC
An internal EBTCM malfunction exists.
Action Taken When the DTC Sets
| • | A malfunction DTC is stored. |
| • | The ABS remains functional. |
| • | The ABS indicator remains OFF. |
Conditions for Clearing the DTC
| • | The condition for DTC is no longer present and you used scan tool Clear DTCs function. |
| • | The condition for DTC is no longer present and you used the On-Board Clear DTCs function. |
| • | The EBTCM does not detect the DTC in 50 drive cycles. |
Diagnostic Aids
| • | When the scan tool displays the DTC, 2 more numbers follow the DTC. Note the 2 numbers and any other DTCs. The 2 numbers with the DTC are an engineering aid in order to determine the cause of the internal malfunction. |
| • | Make sure the integrity of the connection between the EBTCM and the BPMV is secure, tight, and free from corrosion. |
Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you perform the ABS Diagnostic System Check? | -- | Go to Step 2 | |
2 | Are any valve solenoid DTCs present (C1261-C1274)? | -- | Go to Step 3 | |
3 |
Was any damage found? | -- | Go to Step 4 | Go to Step 5 |
4 | Repair as necessary. Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | -- | -- | |
5 | Replace the EBTCM. Refer to Electronic Brake Control Module Replacement . Did you complete the repair? | -- | -- |
