Defroster Grille Replacement Without UV2

Caution: Refer to SIR Caution in the Preface section.

1. Using a flat bladed tool, pry upward on the rear edge of the defroster grille (1) in order to release defroster grille (1) retaining clips from the IP upper trim pad.



2. Disconnect the sunload sensor electrical connector (2).



3. Pull up on the rear edge, and then rearward, in order to remove the defroster grille (1).
4. Remove the defroster grille (1) from the instrument panel.

1. Partially install the defroster grille.



2. Reconnect the sunload sensor electrical connector (2) to the sunload sensor (1).



3. Insert the forward edge of the defroster grille (1) to the IP.

Align the defroster grille with the IP opening.

4. Press down along the rear edge of the defroster grille (1) in order to engage the retainer clips.

Defroster Grille Replacement UV2

Caution: Refer to SIR Caution in the Preface section.

1. Using a flat bladed tool, pry upward on the rear edge of the defroster grille (1) in order to release defroster grille (1) retaining clips from the IP upper trim pad.



2. Disconnect the sunload sensor electrical connector (2).



3. Pull up on the rear edge, and then rearward, in order to remove the defroster grille (1).
4. Remove the defroster grille (1) from the instrument panel.

1. Partially install the defroster grille.



2. Reconnect the sunload sensor electrical connector (2) to the sunload sensor (1).



3. Insert the forward edge of the defroster grille (1) to the IP.

Align the defroster grille with the IP opening.

4. Press down along the rear edge of the defroster grille (1) in order to engage the retainer clips.