Brake System Indicators
Reference numbers are used in conjunction with a DIC warning message on export
vehicles only.
BRAKE
The IPC illuminates the BRAKE indicator and sends a serial data message in
order to activate an audible warning when the following occurs:
| • | The IPC detects that the park is applied signal circuit is low. |
| • | The IPC detects a low brake fluid condition signal circuit is low. |
| • | The electronic brake control module (EBCM) detects a malfunction with
the antilock brake system. The IPC receives a serial data message from the EBCM
requesting illumination. |
| • | The IPC detects a loss of communications with the EBCM and the discrete
back-up ABS indicator signal is open. |
| • | The IPC performs the displays test at the start of each ignition cycle.
The indicator illuminates for approximately 3 seconds. |
CHECK BRAKE FLUID - 37
The IPC illuminates the CHECK BRAKE FLUID -- 37 indicator in the DIC and
sends a serial data message in order to activate an audible warning
when the IPC detects that the brake fluid level is below the normal operating
range.
