Wire Harness Assembly - Assemble - Off Vehicle Power Tilt\\Telescope-Column Shift

Important: If the wire harness assembly is not routed correctly, it may cause damage to the wire harness assembly.

1. Slide the bulkhead connector into the column shift and tilt motor bracket assembly.
2. Connect all of the connectors to the wire harness assembly.
3. Install the upper and lower trim covers. Refer to Steering Column Trim Covers - Assemble - Off Vehicle .

Wire Harness Assembly - Assemble - Off Vehicle Power Tilt and Telescope, Floor Shift

Important: If the wire harness assembly is not routed correctly, it may cause damage to the wire harness assembly.

1. Slide the bulkhead connector into the column shift and tilt motor bracket assembly.
2. Connect all of the connectors to the wire harness assembly.
3. Install the upper and lower trim covers. Refer to Steering Column Trim Covers - Assemble - Off Vehicle .

Wire Harness Assembly - Assemble - Off Vehicle Manual Tilt, Floor Shift

Important: If the wire harness assembly is not routed correctly, it may cause damage to the inflatable restraint steering wheel module coil.

1. Slide the bulkhead connector into the steering column.
2. Connect all of the connectors to the wire harness assembly.
3. Install the upper and lower trim covers. Refer to Steering Column Trim Covers - Assemble - Off Vehicle .

Wire Harness Assembly - Assemble - Off Vehicle Manual Tilt, Column Shift

Important: If the wire harness assembly is not routed correctly, it may cause damage to the inflatable restraint steering wheel module coil.

1. Install the bulkhead connector.
2. Connect all of the connectors to the wire harness assembly.
3. Install the upper and lower trim covers. Refer to Steering Column Trim Covers - Assemble - Off Vehicle .