Circuit Description
The remote function actuator (RFA) module performs this test every time the module processes a message from a transmitter.
Conditions for Setting the DTC
The RFA module sets this DTC if the module receives a transmission from an out of sync transmitter.
Action Taken When the DTC Sets
| • | The RFA module stores a DTC B3108 in current memory. |
| • | No driver warning message is displayed for this DTC. |
Conditions for Clearing the DTC
The RFA module clears this DTC after a transmission is received from a valid synchronized transmitter.
Diagnostic Aids
This DTC will stay in memory as current (then history, until cleared) until the module receives a valid transmission from the remote function actuator (RFA) transmitters.
Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you perform the Remote Keyless Entry Diagnostic System Check? | -- | Go to Step 2 | |
2 |
Did DTC B3108 return? | -- | Go to Step 3 | |
3 | Replace the RFA module. Refer to Remote Control Door Lock Receiver Replacement . Is the repair complete? | -- | -- |
