Notice: Use J 36850 or equivalent during assembly in order to retain
checkballs or to lubricate components. Lubricants other than the recommended
assembly lube changes the transmission fluid characteristics and
causes undesirable shift conditions or filter clogging.
- Clean the case thoroughly with solvent. Air dry.
| • | Do not wipe with a cloth or with paper shop towels. |
| • | Remove all residual sealant. Clean the case threads. |
- Inspect the case channel plate side for the following:
| • | Unmarred gasket sealing surfaces that need to be cleaned |
| • | Bolt holes with stripped threads |
| • | Porosity between oil passages |
| • | Damaged snap ring grooves |
- Inspect all servo bores for the following:
