1. Turn OFF the ignition.
2. Install the scan tool.
3. Turn ON the ignition.
4. Attempt to establish communication with the memory mirror module (MMM).

Does the scan tool communicate with the MMM?

--

Go to Step 2

Go to Diagnostic System Check - Data Link Communications in Data Link Communications

Select Display MMM DTC function with the scan tool.

Are any DTCs stored?

--

Go to Diagnostic Trouble Code (DTC) List/Type

Go to Step 3

Is the customer complaint with the power mirrors?

--

Go to Outside Mirrors System Check

Go to Step 4

Is the customer complaint with the power door locks?

--

Go to Power Door Locks System Check

Go to Power Windows System Check