SERVICE TOOLS FOR THE 1981 COMPUTER COMMAND CONTROL SYS.

The new 1981 Computer Command Control System has been designed to be serviced with a minimum of special tools. Listed below are the tools, both essential and available, that will help make servicing the system easier.

1980 Essential Tools 1981 Essential Tools -------------------- -------------------- J-29125 Digital Multimeter J-9789-130 Float Level Gauge (Quadrajet) J-28696-B Metering Jet & Mixture Control Adj. Set

Available Tools

NAME SOURCE TOOL NO. SOURCE TOOL NO. ---- ------ -------- ------ -------- Vacuum Pump & Gauge Kent-Moore J-23738 Borroughs T-7517 Choke Angle Gauge " J-26701-A " BT-7704 Choke Rod Bending Tool " J-9789-111 " BT-91A Float Gauge " J-9789-90 " BT-3009 Float Level Gauge " J-9789-130 " BT-7720 Carburetor Adjustment Tools " J-28696-B " BT-7928 " " " " (kit) " BT-7967A Idle Mixture Tool " J-2930 " BT-7610B HEI Spark Tester " J-26792 AC Delco ST-125 Oxygen Sensor Wrench " J-29533 Snap-On AN8508-14 "Weather-Pack" Terminal Tool " J-28742 Terminal Tool " J-22727 ISC Adjustment Wrench " J-29607 Snap-On RS1214A

OTHER ITEMS

"Weather-Pack" Jumper Leads - Use Terminals 12014836 and 12014837 (available from GMPD) Alligator Clip Jumper Leads Test Light Dwell Meter* Pos-i-drive #1 and #3 Screwdrivers Torx Bits #25 and #30 Tachometer

*Most new dwell meters will work properly with the Computer Command Control System. However, if the idle speed changes when a meter is connected, use a different meter.

Kent-Moore Tool Division Borroughs Tool & Equipment Company 29784 Little Mack 2429 N. Burdick Roseville, MI 48066 Kalamazoo, MI 49007 (313) 774-9500 (616) 345-5163

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.