GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 492380  Size: SH
  1. Remove the door trim panel. Refer to Rear Side Door Trim Panel Replacement or Front Side Door Trim Panel Replacement.
  2. Disconnect the electrical connectors (2) from the control module.
  3. Remove the door control module (1) by releasing the retainer tabs (3).

Installation Procedure


    Object Number: 492380  Size: SH
  1. Snap the door module (1) onto the water deflector.
  2. Connect the electrical connectors (2).
  3. Install the door trim panel. Refer to Rear Side Door Trim Panel Replacement or Front Side Door Trim Panel Replacement.
  4. If the door control module is equipped with the express-up function, reprogram the module. Refer to Control Module References for programming and setup information.