Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedure

1. Remove the instrument panel cluster trim bezel. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement .
2. Remove the instrument panel upper trim pad. Refer to Instrument Panel Upper Trim Pad Replacement .
3. Refer to Control Module References for replacement and setup information.

1

Screw, Instrument Panel Cluster Assembly (Qty: 4)

Tighten
2 N·m (18 lb in)

2

Cluster Assembly, Instrument Panel

Tip
Disconnect the electrical connector.

3

Screw, Instrument Panel Cluster Assembly (Qty: 2)

Tighten
2 N·m (18 lb in)

4

Bracket, Instrument Panel Cluster